Critical process died BSOD on Windows 10

The process died BSOD when it was trying to check Windows 10 updates. The issue is that the update checks are so frequent, they’re causing more harm than good by slowing down performance on your PC and also disrupting gameplay in games such as Counter-Strike: Global Offensive.

The “windows 10 critical process died no safe mode” is a problem that has been present for a while. Microsoft has released an update to fix the issue.

Critical Process Died (error code 0x000000EF) is a Windows 10 stop code that signals that Windows OS is having problems continuing one or more of your system’s processes. The CRITICAL PROCESS DIED BSOD error is generated if the CPU is unable to correctly handle these numerous processes. This mistake may be quite dangerous since it might harm your hard drive, RAM, or, in rare cases, your CPU. The most common reason of Critical Process Died error on Windows 10 is a malfunctioning driver. Other causes include system file corruption, compatibility issues, bad memory, and more.

“Your computer has encountered a problem and has to be restarted.” We’re merely gathering some error data before restarting for you. 0% of the way done If you want to learn more, look up this mistake later on the internet: THE CRITICAL PROCESS HAS ENDED”

Windows 10’s critical process has died.

If your Windows 10 computer suddenly turns blue and claims you have a CRITICAL PROCESS DIED problem, don’t worry, we have a step-by-step instruction on how to repair it.

To begin, disconnect any external devices from your computer, including secondary displays, printers, phones, external hard drives, and other USB devices, and then attempt to restart Windows normally.

Windows may sometimes restart correctly after a simple restart, however certain users’ windows will regularly restart with this BSOD problem. As a result, you’ll need to enter safe mode in order to apply the methods listed below to resolve the Windows 10 important process died loop.

Uninstall the most recent software that has been installed.

If you recently installed new software on your computer, consider deleting it after the issue arises. To uninstall an application, go to Start > type Control Panel > choose the program(s) that were recently installed > click Uninstall.

Turn off the feature that allows you to start up quickly.

Disable Fast Startup Feature Fix has been reported by a lot of Windows users. For them, the majority of the blue Screen Error. Fast Starting (hybrid Shutdown Feature) is a new feature in Windows 10 that reduces startup time and speeds up the startup of the operating system. However, the speedy startup function may sometimes cause issues. To avoid a feature BSOD problem on Windows 10, we suggest simply disabling the Fast Startup Feature.

To turn off the Fast Startup feature, follow these steps.

  • Control panel is now open.
  • Look for and choose power alternatives.
  • Select What the Power Buttons Do from the drop-down menu.
  • Then, under Change Settings that are Currently Unavailable, choose Change Settings that are Currently Unavailable.
  • To deactivate the Fast Startup Feature, uncheck the Turn on Fast Startup option (recommended).

Fast Startup

Driver Updates for Devices

System crashes might be caused by a driver that has been installed incorrectly or is faulty. Install the most recent drivers from your PC manufacturer’s website to resolve BSODs caused by driver difficulties.

To upgrade a device driver, such as the Display /graphics driver, follow these steps.

  • Click OK after pressing Windows + R and typing devmgmt.msc.
  • This will bring up the Device Manager window.
  • Invest in a display adapter,
  • Select Update from the right-click menu of the installed display driver.
  • To let Windows search for and install the newest driver on your computer, follow the on-screen directions.

Update display driver software

(If you are in safe mode, you may not be connected to the internet, preventing Windows from downloading the most recent driver from the update database.)

That is why, on a separate computer, go to the device manufacturer’s website and download the most recent available driver for your malfunctioning PC. Now go to the afflicted PC and open device manager, then expand display adapter, right-click on the display driver, and choose remove. To confirm and restart Windows, click OK. Install the most recent driver you got from the manufacturer’s website next.

Scan and Repair Corrupted System Files

When a crucial process dies, the cause might be damaged or missing system data, resulting in a Windows 10 BSOD Error. In this scenario, you may inspect the file system using the SFC /Scannow command. If the System File Checker discovers that the protected files have been replaced with wrong files, it will alert you. It will replace the wrong system file with the proper system file from the system file backup (particularly dllcache). You may use this command to fix system files by following the instructions below.

First and foremost, you must run Command Prompt as an administrator. After that, type “sfc /scannow” and press enter.

system file checker utility Windows 10

This will take around 15-20 minutes to complete, so sit back and relax.

When you’re done, you’ll be able to see whether any issues with system files were discovered, and if so, whether they were resolved or not. If corrupt system files were the true cause, reboot your PC and you should not encounter crucial process died windows 10 BSOD Error.

Repairing a Corrupted System Image using DISM

If the sfc /scannow command fails to restore the damaged system files, you may repair the Windows system image using the DISM command. Deployment Image Servicing and Management, generally known as DISM, is a command-line application included with Windows 10. To restore the system image, you should execute the command prompt as an administrator.

Type DISM /Online /Cleanup-Image /RestoreHealth in the command prompt window.

DISM restore health command

To scan the Windows image for potential corruption, use the DISM command with the /ScanHealth options. The /ScanHealth switch, unlike the /CheckHealth switch, may take up to 10 minutes to complete.

Tool for Memory Management

If you’re still having problems with your windows after doing all you can to fix them, call a professional. Then it’s conceivable that your computer’s ram has been corrupted. You may check your computer memory for problems with the Windows memory diagnostic tool.

Memory Diagnostic Tool 

Make use of the System Restore point

In instances like these, Restore Points are quite helpful. This procedure will only be usable if you have already created a Restore point. When your computer was as smooth as butter.

Read How To Perform System Restore on Windows 10 for people who have previously made a Restore point.

Windows should be refreshed or reinstalled.

If none of the suggestions above work, you may be required to Refresh or Reinstall Windows. Your personal data will be saved when you refresh Windows, but your operating system will be reinstalled.

Everything from your System Drive, which is usually C Drive, will be deleted if you reinstall Windows. As a result, you should make a backup of everything on your C drive. This option almost often solves the important process died blue screen issue in Windows 10.

Simply hover your mouse over the right corner of your screen and choose Settings > Change PC Settings > Update and Recovery > Recovery to refresh your PC. Just underneath “Refresh your PC without damaging your files,” click Get Started. Read How to Refresh or Reinstall Windows 10 for more information.

These are some of the finest options for fixing essential processes that have died in Windows 10. Windows 10 error code critical process died causes a screen problem. If you have any questions or suggestions, please leave them in the comments section below.

Ezoicthis advertisement should be reported

The “windows 10 critical process died reddit” is a problem that has been present for a while. The issue causes the computer to crash, and it was reported on the official Microsoft support website.

Frequently Asked Questions

How do I fix Windows 10 Blue Screen critical process died?

Can a virus cause critical process died?

A: Yes, a virus can cause critical process to died.

Related Tags

  • critical process died windows 10 cannot boot loop
  • critical process died fix
  • critical process died windows 11
  • windows 10 critical process died 2021
  • critical process died keeps restarting