There is a problem with the wireless adapter or access point. How do I solve the error?

The status of your wireless adapter or access point includes a number in the lower-right corner. For example, “A2” would be the second letter of its model name. The next step is to find out which edition you have and if it supports 5 GHz band frequencies that are currently unavailable on 2.4 GHz bands within range (if you’re unsure). If everything checks out well so far then try changing channels by pressing the Wi-Fi button until you see one that’s not listed as “Limited.”

The “how to fix problem with wireless adapter or access point windows 7” is a question that has been asked many times. The article will provide the steps on how to solve the issue.

The wireless adapter or access point is malfunctioning. What can I do to fix the problem?

The Windows Network Diagnostic Tool is capable of identifying a wide range of issues, but it has little knowledge on how to resolve them. So, if we run troubleshooting after having difficulty connecting to the Internet over a wireless network, we’ll most likely receive an error message that says “Problem with wireless network adapter or access point” with the status “Detected” and a yellow exclamation mark. It’s also unclear how to correct this issue. And, based on the problem’s description, it’s unclear what the specific causes are. In a computer’s Wi-Fi adaptor or on the side of an access point (router). As if there might be anything, but we’ll have to find it out on our own.

This problem happens as a consequence of using the diagnostic program in Windows 7, Windows 8, or Windows 10, as we have previously seen. However, we don’t generally run the diagnostic tool in this manner; most likely, there was an issue with the Wi-Fi network connection. Unable to connect to Wi-Fi in Windows 7 or Unable to connect to this network in Windows 10 is most likely a Windows issue. Then came the message “Problem with the wireless network adapter or access point.”


It might also be an issue if the laptop’s Wi-Fi is turned off and Windows is unable to detect a network. In any situation, we must determine the source of the problem and eradicate it. It makes no difference if the problem is caused by the adapter in a laptop or PC or by the network. This issue may be accompanied by the Wireless is disabled error.

How to repair a wireless adapter or hotspot in Windows 10/8/7

Important! To begin, I recommend that you verify that there are no issues on the access point’s side. An access point is a router that spreads a Wi-Fi network in this scenario. It might also be another computer running a Wi-Fi network distribution or a phone in modem mode. How to do it: if other devices connect to the network without issue and the Internet works on them, then the problem is most likely with our computer (the wireless network adapter), not with the access point. If the Internet isn’t working or all of your devices aren’t connecting, you’ll need to address router issues.

Make sure to reset your router if it’s yours. Turn off the power for a minute or two before resuming use. If the router and, as a result, the wireless network are not yours, you should be aware that your device may be prohibited on the access point’s side. Even if there are other devices on the network. In this scenario, check whether the laptop (where the issue occurred) is connected to any other networks. If the laptop does not connect with the same issues, the problem is with the laptop (in the Windows system). After that, I’ll go through a few solutions that are particular to the wireless network adapter.

  1. Wi-Fi network parameters are being removed.

Delete / forget the Wi-Fi network and rejoin to it is the easiest and most effective option. Open “Settings” in Windows 10 and go to the “Network and Internet” – “Wi-Fi” section. “Manage Known Networks” should now be open.


Then, if the network with the faulty connection is shown, choose it and click “Forget.”


We then attempt to join to a wireless network using this technique.

       2. Uninstalling and reinstalling the wireless adapter

If Windows tells you that the wireless network adapter isn’t working, you’ll need to reinstall it. It is not difficult to do this. Alternatively, you may remove it through Device Manager. It will be re-detected and installed after that. However, I would caution you that the adapter may not be installed automatically. Particularly in Windows 7. In any case, I suggest downloading and deleting your Wi-Fi adapter’s driver from the device manager. However, since your computer’s Internet connection is likely to be down, you’ll have to download everything from a different device.

The devmgmt.msc command (or the Win + R keyboard shortcut) may be used to launch the device manager from the Run window.

Right-click the wireless network adapter on the “Network adapters” tab and pick “Uninstall” from the menu.


The wireless adapter, not the network card, is the only thing we remove. The phrases “Wireless,” “AC,” “Dual Band,” and “802.11” are commonly included in its name. To begin, you may delete all of the apps except the driver programs (do not check the box). If it doesn’t work, uncheck the option next to “Remove driver applications for this device” and try again.

Remember to restart your computer thereafter.

3. Installing the most recent wireless adapter driver

You must download and install the most recent driver for the Wi-Fi adapter in our laptop or PC. Of course, you may update the driver via Windows’ device manager (automatic search), but the system will most likely just “claim” that the driver does not need to be updated since it is the latest and finest in the world.


Everything will have to be done manually, as usual. If you have a laptop, you can get the driver from the manufacturer’s website. Only for your specific model and version of Windows. If it’s a PC, it’s almost certainly linked to a USB adaptor or PCI card. There is both a model and a manufacturer for this adapter. The newest driver may be downloaded from the manufacturer’s website.

Simply execute the installation after downloading the driver. Typically, this is the Setup.exe file.

  4. Network parameters are reset

You may easily reset the network to avoid climbing the system settings and checking various IP values, etc.

5. Restarting or checking the DHCP client service

You must first launch “Services” (either by searching for it in Windows 10 or by typing services.msc in the “Run” box (Win + R). After that, we locate the DHCP client service (one of the first), right-click it, and choose “Restart.”


It’s also a good idea to check the starting type to see whether it’s set to “Automatic.” We discover and verify whether the “WLAN Auto-Configuration Service” service is operating in the same location (and restarting).

This service is prone to a variety of issues. This includes when it begins. Friends, everything is back to normal: we were able to resolve the issue “The wireless network adapter or access point has a problem” – let us know how you did it and what approach worked for you in the comments. If not, please provide a detailed description of your issue. I will undoubtedly respond to everyone and make every effort to assist.


Watch This Video-

The “why do i keep getting problem with wireless adaptor configuration” is a common error that users are experiencing. This article will help you solve the issue by explaining how to fix it.

Frequently Asked Questions

How do I fix problem with wireless adapter or access point Windows 10?

A: You may need to restart your PC. To do so, press Windows key + R on your keyboard and type msconfig into the dialog box then hit Enter or click ok. Then find Startup Section in the window that appears. Find a setting called Network Connections. It should be at least 3-4 lines long with a list of network adapters (if you have more than one). Double click on any entry and it will open up its properties page which has troubleshooting options such as Restart Network Service, Disable this adapter etc…

How do I fix the wireless adapter on my Lenovo laptop?

A: To fix the wireless adapter on your Lenovo laptop, you will need to physically remove and replace it with a new one. This is because the wireless card has been damaged by static electricity from touching other components in the machine.

How do I fix the wireless adapter on my Dell laptop?

A: The wireless adapter on your Dell laptop may be faulty or the driver is not installed properly. You should try reinstalling the drivers and use a wired connection until it works again.

Related Tags

  • how to fix problem with wireless adapter windows 7
  • how to fix problem with wireless adapter or access point windows 10
  • how do i fix problem with wireless adapter or access point
  • problem with wireless adapter or access point windows 7 dell
  • problem with wireless adapter or access point windows 8